jstein
|
PowerCan you tell me how much power is outputed per each place to plug the servos in? It appears to me that most servos are wither 4.8 or 6 volts and I guess I was wondering if either one could be used with the BOC.
|
Phoenix
|
4.8-6VDC servos should work with BoC, the power supply to BoC is 5VDC.
If you are using servos with a particularly high current drain or a nigh number of servos then its recommend that you a separate power supply to power the servos.
When using a secondary power supply you need to connect the 0VDC of the secondary power supply to the BoC 0VDC to ensure that the system works correctly
|
Rev. Noch
|
I am also wondering what you believe are the longest leads you can put from the BOC to the servos themselves?
I was thinking that I would like to have the BOC run servos in a couple of different props that may be several feet apart. I was figuring that I could also possibly power the BOC with a PC power supply for plenty of power. Does any of this sound reasonable?
|
|
|
